3-34 FUEL SYSTEM (DFI)

Self-Diagnosis

•To enter the self-diagnosis dealer mode 2, open [B] and ground [A] the lead more than five times [F] within 2 seconds [C] after the lead is first grounded, and then keep it grounded continuously [D] for more than 2 seconds.

○Count the blinks of the LED light to read the service code. Keep the auxiliary lead ground until you finish reading the service code.

Auxiliary Lead [E]

Self-diagnosis Terminal [G]

NOTE

○To enter the dealer mode 2 from the dealer mode 1, turn off the ignition switch once.

Service Code Clearing Procedures

Service• Code Clearing Procedures

Enter the self-diagnosis dealer mode 2 (see Self -diagnosis Procedures).

NOTE

○Make sure to keep the grounding until the following opening and grounding starts.

•Pull the clutch lever in more than 5 seconds, and then

•release it.

Repeat opening [B] and grounding [A] the lead (self-diagnosis terminal) more than five times [F] within 2 seconds [C] after the lead is grounded, and then keep it grounded continuously [D] for more than 2 seconds.

Auxiliary Lead [E] Self-diagnosis Terminal [G]

FUEL SYSTEM (DFI) 3-35

Self-Diagnosis