- •1.1 Configuring File Management Commands
- •1.1.1 Copy
- •1.1.2 Delete
- •1.1.4 ip address
- •1.1.5 ip route
- •1.1.6 show configuration
- •1.1.7 format
- •1.1.8 more
- •1.2 BasicSystemManagementCommands
- •1.2.1 boot flash
- •1.2.3 chinese
- •1.2.4 chram
- •1.2.5 date
- •1.2.6 english
- •1.2.10 rename
- •1.2.11 reboot
- •1.2.12 alias
- •1.2.13 boot system flash
- •1.2.14 help
- •1.2.15 history
- •1.2.16 show alias
- •1.2.17 show job
- •1.2.18 show break
- •1.2.19 show memory
- •1.3 HTTP Configuration Command
- •1.3.1 ip http access-class
- •1.3.2 ip http port
- •1.3.3 ip http server
- •1.3.4 debug ip http
- •Chapter 2 Terminal Service Configuration Command
- •2.1 Telnet Configuration Command
- •2.1.1 telnet
- •2.1.2 ip telnet
- •2.1.4 where
- •2.1.5 resume
- •2.1.6 disconnect
- •2.1.7 switchkey
- •2.1.8 switchmsg
- •2.1.9 sequence-char
- •2.1.10 clear telnet
- •2.1.11 show telnet
- •2.1.12 debug telnet
- •2.2 Terminal Configuration Command
- •2.2.1 attach-port
- •2.2.2 autocommand
- •2.2.3 clear line
- •2.2.4 connect
- •2.2.5 disconnect
- •2.2.6 exec-timeout
- •2.2.7 length
- •2.2.8 line
- •2.2.9 location
- •2.2.10 login authentication
- •2.2.11 monitor
- •2.2.12 no debug all
- •2.2.13 password
- •2.2.14 resume
- •2.2.15 switchkey
- •2.2.16 sequence-char
- •2.2.17 show debug
- •2.2.18 show line
- •2.2.19 switchmsg
- •2.2.20 terminal length
- •2.2.21 terminal monitor
- •2.2.22 terminal width
- •2.2.23 terminal-type
- •2.2.24 where
- •2.2.25 width
- •3.1 SNMP Commands
- •3.1.1 snmp-server community
- •3.1.2 snmp-server contact
- •3.1.4 snmp-server location
- •3.1.5 snmp-server packetsize
- •3.1.6 snmp-server queue-length
- •3.1.7 snmp-server trap-source
- •3.1.8 snmp-server trap-timeout
- •3.1.11 snmp-server source-addr
- •3.1.12 snmp-server encryption
- •3.1.13 show snmp
- •3.1.14 debug snmp
- •3.2 Configuring RMON Commands
- •3.2.1 rmon alarm
- •3.2.2 rmon event
- •3.2.3 rmon collection stat
- •3.2.4 rmon collection history
- •3.2.5 show rmon
- •3.3 Configuring PDP Commands
- •3.3.1 pdp timer
- •3.3.2 pdp holdtime
- •3.3.3 pdp version
- •3.3.5 pdp enable
- •3.3.6 show pdp traffic
- •3.3.7 show pdp neighbour
- •4.1 Network Testing Tool Commands
- •4.1.1 ping
- •4.2 System Debugging Commands
- •4.3 Fault Diagnosis Commands
- •4.3.1 logging
- •4.3.2 logging buffered
- •4.3.3 logging console
- •4.3.4 logging facility
- •4.3.5 logging monitor
- •4.3.6 logging on
- •4.3.7 logging trap
- •4.3.8 service timestamps
- •4.3.9 clear logging
- •4.3.10 show break
- •4.3.11 show controller
- •4.3.12 show debug
- •4.3.13 show logging
- •Chapter 5 SSH Configuration Commands
- •5.1.1 ip sshd enable
- •5.1.2 ip sshd timeout
- •5.1.3 ip sshd auth-method
- •5.1.4 ip sshd access-class
- •5.1.5 ip sshd auth-retries
- •5.1.6 ip sshd clear
- •5.1.8 show ssh
- •5.1.9 show ip sshd
- •Chapter 6 Other system Command
- •6.1 The link scan command
|
Baisc Configuration Commands |
Current Rx(2) State [RSTATE]=0x9000, |
BD Ptr [RBPTR]=0x1156b18 |
Current Tx(5) State [TSTATE]=0x9000, |
BD Ptr [TBPTR]=0x1156df4 |
SCC UART PARAMETER RAM (at 0xfff03f30) Maximum idle characters 1
Break Character 1 Received Parity Error 58445
Received Frame Error 65261
Received Noise Error 39256 Number of break conditions 22595 Last Received Break length 1524 uart1 63220 uart2 1
Transmit Out of sequence 0
cc[0] = 4011 cc[1] = 4013 cc[2] = 8000 cc[3] = 4011 cc[4] = 4013 cc[5] = 8000 cc[6] = 9c80 cc[7] = 7051 rccm = c0ff rccr = bf28 rlbc = a6fe
RxBufSiz 254 flow 1
flag=00000120, size=00000008, X=11, Xoff=13
DCR_B3#
The whole displayed information can be divided into the following parts:
(4)Name and type of interface control Here it is MPC860 and SCC.
(5)Running state of the controller
Statistics data about breakdown, error and resetting Length of the receiving and transmitting queue
(6)Controller configuration parameter
Register content parameter Controller partial parameter Physical protocol parameter
(7)State when BD is received or sent
The length, state and indicator of BD are listed out.
The location where BD is received or sent and relative states
4.3.12show debug
It is used to display all the enabled debugging options of the switch. show debug
Parameter
None
Command mode
Management mode
Example
switch# show debug
- 82 -
Baisc Configuration Commands
Crypto Subsystem:
Crypto Ipsec debugging is on
Crypto Isakmp debugging is on
Crypto Packet debugging is on
Relative command
debug
4.3.13show logging
It is used to display the state of logging (syslog). show logging
Parameter
None
Command mode
Management mode
Instruction
It is used to display the state of logging (syslog), including the login information about the console, monitor and syslog.
Example
switch# show logging
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
Console logging: level debugging, 12 messages logged
Monitor logging: level debugging, 0 messages logged
Buffer logging: level debugging, 4 messages logged
Trap logging: level informations, 0 message lines logged
Log Buffer (4096 bytes):
2000-1-4 00:30:11 Configured from console 0 by DEFAULT
2000-1-4 00:30:28 User DEFAULT enter privilege mode from console 0, level = 15
Relative command
clear logging
- 83 -