- •Preface to the Second Edition
- •Preface to the First Edition
- •ACKNOWLEDGEMENTS
- •Contents
- •1.1 EXERCISES, QUESTIONS, AND PROBLEMS
- •2.1 INTRODUCTION
- •2.2 CORROSION BY LIQUIDS
- •2.2.1 Introduction
- •2.2.2 Crystalline Materials
- •Attack by Molten Glasses
- •Attack by Molten Salts
- •Electrochemical Corrosion
- •Attack by Molten Metals
- •Attack by Aqueous Media
- •2.2.3 Glasses
- •Bulk Glasses
- •Fiber Glass
- •Bioactive Glass
- •2.3 CORROSION BY GAS
- •2.3.1 Crystalline Materials
- •2.3.2 Vacuum
- •2.3.3 Glasses
- •2.4 CORROSION BY SOLID
- •2.5 SURFACE EFFECTS
- •2.5.1 Surface Charge
- •2.5.2 Porosity and Surface Area
- •2.5.3 Surface Energy
- •2.6 ACID/BASE EFFECTS
- •2.7 THERMODYNAMICS
- •2.7.1 Mathematical Representation
- •2.7.2 Graphical Representation
- •2.8 KINETICS
- •2.9 DIFFUSION
- •2.10 SUMMARY OF IMPORTANT CONCEPTS
- •2.11 ADDITIONAL RELATED READING
- •2.12 EXERCISES, QUESTIONS, AND PROBLEMS
- •REFERENCES
- •3.1 INTRODUCTION
- •3.2 LABORATORY TEST VS. FIELD TRIALS
- •3.3 SAMPLE SELECTION AND PREPARATION
- •3.4 SELECTION OF TEST CONDITIONS
- •3.5 CHARACTERIZATION METHODS
- •3.5.1 Microstructure and Phase Analysis
- •Visual Observation
- •Optical Microscopy
- •X-ray Diffractometry
- •Transmission Electron Microscopy
- •3.5.2 Chemical Analysis
- •Bulk Analysis
- •Surface Analysis
- •3.5.3 Physical Property Measurement
- •Gravimetry and Density
- •Porosity-Surface Area
- •Mechanical Property Tests
- •3.6 DATA REDUCTION
- •3.7 ADDITIONAL RELATED READING
- •3.8 EXERCISES, QUESTIONS, AND PROBLEMS
- •REFERENCES
- •4.1 INTRODUCTION
- •4.2 ASTM STANDARDS
- •4.2.16 Permeability of Refractories, C-577
- •4.2.26 Lead and Cadmium Extracted from Glazed Ceramic Surfaces, C-738
- •4.3 NONSTANDARD TESTS
- •4.4 ADDITIONAL RELATED READING
- •4.5 EXERCISES, QUESTIONS, AND PROBLEMS
- •REFERENCES
- •5.1 ATTACK BY LIQUIDS
- •5.1.1 Attack by Glasses
- •Alumina-Containing Materials
- •Zircon
- •Zirconia
- •Carbides and Nitrides
- •5.1.2 Attack by Aqueous Solutions
- •Alumina
- •Silica and Silicates
- •Concrete, Cement, Limestone, Marble, and Clay
- •Zirconia-Containing Materials
- •Superconductors
- •Titanates and Titania
- •Transition Metal Oxides
- •Carbides and Nitrides
- •5.1.3 Attack by Molten Salts
- •Oxides
- •Carbides and Nitrides
- •Superconductors
- •5.1.4 Attack by Molten Metals
- •5.2 ATTACK BY GASES
- •5.2.1 Oxides
- •Alumina
- •Alumino-Silicatcs
- •Magnesia-Containing Materials
- •Zirconia
- •5.2.2 Nitrides and Carbides
- •Silicon Nitride
- •Other Nitrides
- •Silicon Carbide
- •Other Carbides
- •5.2.3 Borides
- •5.2.4 Silicides
- •5.2.5 Superconductors
- •5.3 ATTACK BY SOLIDS
- •5.3.1 Silica
- •5.3.2 Magnesia
- •5.3.3 Superconductors
- •5.3.4 Attack by Metals
- •5.4 ADDITIONAL RELATED READING
- •5.5 EXERCISES, QUESTIONS, AND PROBLEMS
- •REFERENCES
- •6.1 INTRODUCTION
- •6.2 SILICATE GLASSES
- •6.3 BOROSILICATE GLASSES
- •6.4 LEAD-CONTAINING GLASSES
- •6.5 PHOSPHORUS-CONTAINING GLASSES
- •6.6 FLUORIDE GLASSES
- •6.7 CHALCOGENIDE-HALIDE GLASSES
- •6.8 ADDITIONAL RELATED READING
- •6.9 EXERCISES, QUESTIONS, AND PROBLEMS
- •REFERENCES
- •7.1 INTRODUCTION
- •7.2 REINFORCEMENT
- •7.2.1 Fibers
- •7.2.2 Fiber Coatings or Interphases
- •7.2.3 Particulates
- •7.3 CERAMIC MATRIX COMPOSITES
- •7.3.1 Oxide-Matrix Composites
- •Al2O3-Matrix Composites
- •Other Oxide-Matrix Composites
- •7.3.2 Nonoxide-Matrix Composites
- •Si3N4 Matrix Composites
- •SiC-Matrix Composites
- •Carbon-Carbon Composites
- •Other Nonoxide Matrix Composites
- •7.4 METAL MATRIX COMPOSITES
- •7.5 POLYMER MATRIX COMPOSITES
- •7.6 ADDITIONAL RELATED READINGS
- •7.7 EXERCISES, QUESTIONS, AND PROBLEMS
- •REFERENCES
- •8.1 INTRODUCTION
- •8.2 MECHANISMS
- •8.2.1 Crystalline Materials
- •8.2.2 Glassy Materials
- •8.3 DEGRADATION OF SPECIFIC MATERIALS
- •8.3.1 Degradation by Oxidation
- •Carbides and Nitrides
- •Oxynitrides
- •8.3.2 Degradation by Moisture
- •8.3.3 Degradation by Other Atmospheres
- •Carbides and Nitrides
- •Zirconia-Containing Materials
- •8.3.4 Degradation by Molten Salts
- •Carbides and Nitrides
- •Zirconia-Containing Materials
- •8.3.5 Degradation by Molten Metals
- •8.3.6 Degradation by Aqueous Solutions
- •Bioactive Materials
- •Nitrides
- •Glassy Materials
- •8.4 ADDITIONAL RELATED READING
- •8.5 EXERCISES, QUESTIONS, AND PROBLEMS
- •REFERENCES
- •9.1 INTRODUCTION
- •9.2 CRYSTALLINE MATERIALS—OXIDES
- •9.2.1 Property Optimization
- •9.2.2 External Methods of Improvement
- •9.3 CRYSTALLINE MATERIALS—NONOXIDES
- •9.3.1 Property Improvement
- •9.3.2 External Methods of Improvement
- •9.4 GLASSY MATERIALS
- •9.4.1 Property Optimization
- •9.4.2 External Methods of Improvement
- •REFERENCES
- •Glossary
- •Epilog
Properties and Corrosion |
351 |
temperatures (i.e., 1000°C), the compressive stresses that may cause spalling were relieved by extrusion of the oxide product from the interior of the material. Thus, prolonged oxidation at 1000°C did not degrade this material.
Oxynitrides
In a study of β’ and O’ SiAlON solutions, O’Brien et al. [8.33] found that the oxygen (or nitrogen) content significantly affected the performance of these materials. The grain boundary glassy phase viscosity increased as the nitrogen content increased, which subsequently slowed the healing of flaws (see Chapter 2, Section 2.2.3 on Glasses and Chapter 6, Section 6.2 upon Silicate Glasses for a discussion of the effects of nitrogen upon durability). The higher viscosity glassy phase also trapped evolving gases more easily, creating additional flaws. In general, the mean retained flexural strengths after oxidation at 1273 K for 24 hr of the SiAlON solutions was higher than that of several silicon nitrides, with the strengths being generally proportional to the oxidation resistance. O’Brien et al. concluded that the retained strengths after oxidation were dependent upon the characteristics of the surface oxide layer that formed. At higher temperatures, the potential for flaw healing was dependent upon the amount and composition of the glassy phase formed.
A zirconium oxynitride with the stoichiometry ZrO2–2x N4x/3 was reported by Claussen et al. [8.34] to form as a secondary phase in hot-pressed ZrO2–Si3N4. This phase readily oxidized to monoclinic ZrO2 at temperatures greater than 500°C. Lange [8.35] used the volume change (about 4–5%) associated with this oxidation to evaluate the formation of a surface compression layer on silicon nitride compositions containing 5–30 vol.% zirconia. To develop the correct stress distribution for formation of the surface compressive layer, the secondary phase that oxidizes must be uniformly distributed throughout the matrix. When oxidized at 700°C for 5 hr, a material containing 20 vol.% ZrO2 exhibited an increase in strength from 683 to 862 MPa. Lange attributed this increase in strength
Copyright © 2004 by Marcel Dekker, Inc.