SECTION 7 – NAVIGATION

Access Runway Information for the

Selected Airport

1.Press the RNWY softkey located at the bottom of the display.

2.Turn the small FMS knob to select the desired runway.

Quickly Tune the COM Transceiver to a

Nearby Airport Frequency

1.Press the FREQ softkey located at the bottom of the display.

2.Turn either FMS knob to select the desired frequency.

3.Press the ENT key. The selected frequency is placed in the standby frequency tuning box.

4.Press the Frequency Toggle key to place the frequency in the active field.

Nearest Airports Information on the PFD

Airport Symbol

Identifier

Runway Length

Primary COM Frequency

Figure 7-10 Nearest Airports Window

1.Press the NRST softkey to display the PFD Nearest Airports Window.

View Information on a Specific Airport in the List

1.Turn the large FMS knob to place the cursor on the desired airport identifier.

2.Press the ENT key to display airport information.

3.Press the ENT key again (cursor is on ‘BACK’) to return to the list.

Load an Airport COM Frequency into the Active COM

1.Turn the large FMS knob to place the cursor on the desired airport frequency shown in the window.

2.Press the ENT key and the selected frequency will become the standby frequency for the active COM.

3.Press the Frequency Toggle key to make the frequency the active frequency.

7.9NEAREST INTERSECTIONS

Figure 7-11 Nearest Intersections Page

Select the Nearest Intersections Page

1.Turn the large FMS knob to select the NRST page group.